Pumps Pumps Pumps Drum Pumps THOMAPLAST ® -Squeeze Bulb Pump made of PE Product specification • Easy to handle squeeze bulb pump made of polyethylene (LD-PE) for discharging of bottles, carboys, tanks and open containers up to approx. 100 litres and depth of max. 100 cm. The squeeze bulb is fitted with an inlet tube of 1 m length with a stopcock at the end. The riser tube is fitted with an adjustable-height conical stopper Ø 35 to 50 mm, securing a better mounting in bottles and carboys. • The squeeze bulb is filled completely by squeezing the bellows several times while the stopcock is closed. When the stopcock is opened, the medium flows continuously out of the container. Type I: Immersion depth 700 mm, tube-Ø 15 mm, flow rate approx. 5 l/min. Type II: Immersion depth 1000 mm, tube-Ø 18 mm, flow rate approx. 9 l/min. Type III: Immersion depth 700 mm, tube-Ø 15 mm, flow rate approx. 5 l/min. Type II and IIIl allow accurate metering as they are fitted with a easy-running ball valve made of polypropylene. The outlet is tapered to 16 mm external diameter. Cat.-No. Type Immersion tube length Ø pipe Max. delivery rate Unit Price mm mm l/min. piece EURO 11606 I 700 15 5 1 67.00 11607 II 1,000 18 9 1 190.00 11608 III 700 15 5 1 169.00 Drum Pumps • Assembling is very easy. Pumpit ® is simply screwed on by means of a hand wheel. By hand pumping (pressing pressure) the fluid is pressurized and delivered through the riser tube to the drain cock. • Accessory: Cat.-No. 83242 - 83246 Cat.-No. Immersion Max. delivery Material Price tube length rate gasket mm l/min. EURO 83239 1,000 8 FPM 215.00 RCT ® -Accessories for Container Pump Cat.-No. Design Price EURO 83242 Mauser Fasset for external thread 31.00 83243 2“ tri-sure van Leer for container internal thread 26.00 83244 Mauser L-ring 220 l-container for internal thread 27.00 83245 2“-fine thread steel drum 26.00 83246 adapter set consisting of Cat. No. 83242-45 77.00 THOMAPLAST ® -Pump for Chemical Tanks made of PP Product specification • Sturdy pump made of polypropylene (PP) for chemical tanks. • All medium-contacting parts made of PP, FPM, and PTFE. • As standard design with permanently screw-on bended discharge which is turnable to avoid dropping. • Accessories: for remote or higher standing barrels fitting connecting tubing and stopcocks are available. • Not suited for inflammable fluids; in this case we recommend the THOMAPLAST ® stainless steel chemical drum pump. • Accessory: Cat.-No. 40032 - 40037 THOMAPLAST ® -Container Pump made of PP Product specification • Container pump made of polypropylene (PP) suitable for fluids up to 1400 cP (at +20 °C). The seal is made of resistant FPM. • The max. delivery rate amounts to 8 l/min, the filling pump being laid out for containers of 15 to 220 l. The stroke volume is 200 ml. The pump is fitted with a stepless length adjustment of immersion tube of 1000 mm as standard. The pump can be screwed on all containers with an opening of 64 mm Ø. • Adapters in 2 inch for ”van-Leer-Systems”, for L-ring and steel drums (220 l) as well as 60-mm-DIN adapter are available as accessories. • Pumpit ® is shockproof and impact-resistant and weights only 310 g. • The special discharge valve allows accurate metering and shuts absolutely tightly without dropping. Cat.-No. Immersion Ø pipe Weight Price tube length mm mm g EURO 40028 500 32 600 215.00 40029 650 32 700 215.00 40030 800 32 800 233.00 40031 1,000 32 880 238.00 2 THOMAFLUID ® Pumps - 2014
Pumps RCT ® -Accessories for Pump for Chemical Tanks Cat.-No. Design Price EURO 40032 outlet tube 1.5 m with screw joint and valve 51.00 40033 outlet elbow 44.00 40034 wall mounting bracket 35.00 40035 drum screwed fitting 2“ 35.00 40036 drum screwed fitting 2“ gas-tight, vapors do not escape 66.00 40037 set: spare gaskets (piston/suction valve) 28.00 THOMAPLAST ® -Drum Pump made of Stainless Steel Product specification • Chemical drum pump made of stainless steel (1.4301) and gaskets made of PTFE. • Safe filling of highly inflammable fluids and solvents. • Remove of electrostatic charge is effected through an earth cable (accessory). • Accessory: Cat. No. 40025 - 40027 • In two different designs: with removable discharge tube with removable hose, 1.2 m in length and ball valve made of stainless steel NW 8 mm, discharge nozzle Ø 12.8 mm Drum Pumps • Anti-static set: When decanting flammable liquids without the machines and containers involved in the process being sufficiently earthed, electrostatic build-up can occur, which for many substances can result in fire or an explosion. The anti-static set ensures easy and reliable earthing and consists of three colour-coded connecting copper cables with clamps in a handy plastic case. Cat.-No. Design Unit Price piece EURO 40025 Discharge tube 1 90.00 40026 Brass barrel screw joint 2“ 1 45.00 40027 Anti-static set 1 85.00 THOMAFLUID ® -Sealless Drum Pump with Speed-Controlled 230 V Electric Drive Application area • Conveying of all kinds of non-combustible, thin to medium viscous fluids out of containers. For stationary or mobile application in permanent or intermittent operation. 40023 40076 Cat.-No. Immersion Ø pipe Design Price tube length mm mm EURO 40023 570 32 with discharge tube 331.00 40024 910 32 with discharge tube 351.00 40076 570 32 with discharge hose and stopcock 529.00 40077 910 32 with discharge hose and stopcock 549.00 RCT ® -Accessories for Drum Pumps Product specification • Discharge tube: Discharge tube for stainless steel barrel pump. • Brass barrel screw joint: The container connectors make decanting even easier and safer with their more secure connection to barrels. The connectors secure the pump in the barrel, enable a vertical position change and allow the required air exchange. Barrel screw joint made of nickel-plated brass for barrel pump stainless steel. Prevents electro-static charge in combination with the anti-static set. For the safe transfer of flammable and easily flammable liquids. For containers with R2“ steel fine thread inside. Product specification • High-performance feed pump for failsafe conveyance of water, aqueous solutions, alkali lyes, and mineral acids. Sealless pump unit made of practice-oriented plastics materials; long suction pipe and drum screwed fitting. Wall hook for deposition of the pump during operational interruptions; speed-controlled easily adjustable electric drive with 5 m connection cable; internally ventilated 230 Volt universal motor with excess-current switch, splash-proof and radio interference suppressed, but not explosion-proof. Technical specification • Pump tube: Material: PP or PVDF Length: suction pipe, 1000 or 1200 mm Pipe Ø: 41 mm Max. delivery rate: 200 l/min. Max. delivery head: 14 mWC THOMAFLUID ® Pumps - 2014 3
In unserem Onlineshop können Sie Laborbedarf ohne Mindestbestellwert bestellen. Unsere Kunden aus Deutschland, der Schweiz und Österreich sowie vielen weiteren Ländern vertrauen seit über 30 Jahren auf RCT Reichelt Chemietechnik. Große Auswahl, hohe Qualität, günstige Preise, faire Versandkosten!
* Alle Preise verstehen sich zzgl. Mehrwertsteuer und Versandkosten und ggf. Nachnahmegebühren, wenn nicht anders beschrieben. Copyright © - Alle Rechte vorbehalten