Pumps Item Max. delivery rate Valve system Suction head dry Material Price l/min. mWC EURO 333629 10 ball 0.5 PTFE 1,712.00 333630 10 cylinder 1 PTFE 1,712.00 333631 10 ball 0.5 PTFE (conductive) 1,838.00 333632 10 cylinder 1 PTFE (conductive) 1,838.00 333633 25 ball 1.5 PTFE 5,450.00 333634 25 cylinder 2 PTFE 5,450.00 333635 25 ball 1.5 PTFE (conductive) 5,880.00 333636 25 cylinder 2 PTFE (conductive) 5,880.00 THOMAFLUID ® -Magnet-Driven Diaphragm Metering Pump for Alkalis and Acids Application area • Process chemistry, process technology, water purification, environmental technology Product specification • Magnet-driven diaphragm metering pump with microprocessorcontrolled electronics • Double ball valve ensures highest accuracy even at smallest flow rates • Stepless adjustable flow rate / dosing rate (stroke length adjustment) with stroke arresting for preventing unintentional adjustment • For conveyance of aggressive and toxic media • Operational reliability due to adjustable pressure limit • External control by impulses (e.g. controls, water meters or any other potential-free pulse sensors) • Stroke rate adjustment 25, 50 and 100 % • Connection for level control Technical specification • Material: Metering head: PVC Diaphragm: PTFE Gasket: EPDM (lye pump); FPM (acid pump) Valve ball: glass • Connection voltage: 230 V~ / 50-60 Hz • Power consumption: 30 W • Amperage: 2.9 A • External input: 5 V= • Input impulse length: >10 ms • Max. counterpressure: see diagrams (depending on the delivery rate) • Max. ambient temperature: +45 °C • Max. permissible temperature of medium: +50 °C • Weight: approx. 2.7 kg • Protective system: IP 65 • Insulation category: F Connection type: pressure and suction side 4/6 mm Diaphragm Pumps Item Type 1 Max. delivery Suction Stroke Price rate 2 head wet frequency l/min. mWC strokes/min. EURO 339681 L 1.7 3 80 1,156.00 339682 A 1.7 3 80 1,156.00 339683 L 3.9 3 80 1,156.00 339684 A 3.9 3 80 1,156.00 1 L= Lye pump; A= Acid pump 2 at counterpressure of 2 bar Connection type: pressure side 4/6 mm, suction side 6/9 mm Item Type 1 Max. delivery Suction Stroke Price rate 2 head wet frequency l/min. mWC strokes/min. EURO 339685 L 12.5 2 120 1,156.00 339686 A 12.5 2 120 1,156.00 339687 L 17.5 1.2 120 1,156.00 339688 A 17.5 1.2 120 1,156.00 1 L= Lye pump; A= Acid pump 2 at counterpressure of 2 bar THOMAFLUID ® -Pneumatic Diaphragm Pump made of PTFE/PE Application area • Universal delivery pump for low to medium duty, e.g. as drum pump. Product specification • CX pumps are oscillating displacement pumps with pneumatic drive, can be infinitely controlled via the air volume. The series comprises four pump sizes with maximum delivery volumes of 10, 20, 50 and 130 l/min. CX pumps are self-priming and protected against dry running. The housing is made of solid PE conductive. This material has an extensive chemical resistance and is approved for foodstuffs. Its conductivity permits use of the pump in explosion-hazard areas and for inflammable liquids. • Pumps of the CX series can optionally be fitted with ball valves or cylinder valves. Ball valves (PTFE) are unsusceptible to solid-containing media, cylinder valves (PE) allow very good dry priming values. PTFE is used as medium-contacting diaphragm material. Technical specification • Max. driving air pressure: 7 bar • Max. operating temperature: +70 °C • Pipe connection: internal thread R 1/4“ Item Dimensions Internal Max. solid Weight LxWxH thread particle size mm mm kg 333637 86 x 137 x 96 NPT 3/8“ 1.5 1.2 333638 86 x 137 x 96 NPT 3/8“ 1.2 333639 124 x 155 x 128 NPT 1/2“ 2 2 333640 124 x 155 x 128 NPT 1/2“ 2 333641 175 x 206 x 173 NPT 3/4“ 3 4.5 333642 175 x 206 x 173 NPT 3/4“ 4.5 333643 240 x 269 x 225 NPT 1 1/4“ 4 10 333644 240 x 269 x 225 NPT 1 1/4“ 10 THOMAFLUID ® V - 2015 99
Pumps Item Max. delivery rate Valve system Suction head dry Suction head wet Price l/min. mWC mWC EURO 333637 10 ball 0.5 8 815.00 333638 10 cylinder 1.5 8 840.00 333639 20 ball 0.5 8 1,010.00 333640 20 cylinder 2 8 1,025.00 333641 50 ball 1.5 9 1,355.00 333642 50 cylinder 3 9 1,390.00 333643 130 ball 2.5 9 1,975.00 333644 130 cylinder 4 9 1,975.00 THOMAFLUID ® -High-Precise Solenoid-Driven Diaphragm Pump made of PVDF Application area • Laboratory technology, environmental technology, nuclear technology, isotope technology, medical engineering, process technology, pharmaceutical technology, chemical technology Product specification • For conveyance of small and medium volume flows • Controlled solenoid-driven diaphragm pump with virtually wear-free drive • Pressure stroke extendable up to 3 minutes • Equipped with PTFE-coated metering diaphragm • With double ball valves on the suction and pressure side (item 300510 to 300513) • Dosing head vent with recirculation of chemicals • Dosing head made of PVDF ensures high chemical resistance • Control via external contact (pulse) • Control via analogue signal (0/4-20 mA) • Connection cable with Euro plug, length 2 m • With fault indicating relay and pulse generator relay output • Process timer for program sequences on request Technical specification • Material: Dosing head: PVDF (polyvinylidene fluoride) Gasket: PTFE Valve ball: ceramic • Max. delivery rate: 7.8 - 75 l/h • Max. backpressure: 2 - 16 bar • Max. stroke frequency: 200 strokes/min • Stroke volume: 0.65 - 6.25 cm 3 /stroke • Suction head: 2 - 6 mWC • Power consumption: 78 W • Connection voltage: 100 - 230 V~ / 50-60 Hz • Max. ambient temperature: -10 to +45 °C • External input: 0/4-20 mA (analogue input) • Protective system: IP 65 • Insulation class: F • Pipe connection: hose nozzle or screwed connection • Weight: approx. 10 kg Connection type: nozzle for tubing 8x5 mm Item Max. delivery rate Max. counterpressure Delivery volume Diaphragm Pumps Suction head wet 1 Price l/h bar ml/stroke mWC EURO 300510 7.8 16 0.65 5 2,600.00 300511 11.3 16 0.94 6 2,600.00 1 suction lift when dosing head and suction pipe are full Connection type: nozzle for tubing 12x9 mm Item Max. delivery rate Max. counterpressure Delivery volume Suction head wet 1 Price l/h bar ml/stroke mWC EURO 300512 19.1 10 1.59 5 2,600.00 300513 29.2 7 2.43 5 2,600.00 1 suction lift when dosing head and suction pipe are full Connection type: ext. thread G 3/4“ Item Max. delivery rate Max. counterpressure Delivery volume Suction head wet 1 Price l/h bar ml/stroke mWC EURO 300514 49 4 4.08 3 2,750.00 300515 75 2 6.25 2 2,800.00 1 suction lift when dosing head and suction pipe are full THOMAFLUID ® -High-Precise Solenoid-Driven Diaphragm Pump made of Stainless Steel Application area • Laboratory technology, environmental technology, nuclear technology, isotope technology, medical engineering, process technology, pharmaceutical technology, chemical technology Product specification • For conveyance of small and medium volume flows • Controlled solenoid-driven diaphragm pump with virtually wear-free drive • Pressure stroke extendable up to 3 minutes • Equipped with PVDF-coated metering diaphragm • With double ball valves on the suction and pressure side (item 300516 - 300519) • Robust design • Control via external contact (pulse), control via analogue signal 0/4-20 mA • Connection cable with Euro plug, length 2 m • With fault indicating relay and pulse generator relay output • Process timer for program sequences on request 100 THOMAFLUID ® V - 2015
ThoMafluid ® III - Verbinder aus Kunststoff
Schlaucholivenverbinder
Verschrau bungen für
Schläuche und Rohre
(metrisch und zöllig)
Schnell verbinder für Rohre
Gewindeadapter
leitfähige Verschraubungen
Tri-Clamp-Verbinder
ThoMaPLaST ® IV
Befestigungselemente
Distanzelemente
Isolierhülsen und -stützer
Isolatoren
Verschlusselemente
Kappen und Stopfen
o-Ringe
Vollmaterial und ummantelt
THoMafluId ® THE bEsT
schläuche aus Elastomeren und Kunststoffen
analytikschläuche
druckschläuche
Hochtemperaturschläuche
Isolierschläuche
Katheterschläuche
laborschläuche
lebensmittelschläuche
Pharmaschläuche
Pumpenschläuche
Wellschläuche
Werkstoffe:
CR EPdM EPdM/PP EVa fEP fPM IIR Mfa
NbR NR Pa PE PEEK Pfa PI Polyolefin PP
PTfE PuR PVC PVdf silikon TPE-E
ThoMafluid ® ThE bEsT
Verbinder aus Kunststoff und Metall
luer-/lock-Verbinder
schlauchtüllen
Verschrau bungen für schläuche
und Rohre (metrisch und zöllig)
steckverbinder für Rohre
Gewindeadapter
leitfähige Verschraubungen
Tri-Clamp-Verbinder
schnellverschlusskupplungen
ThoMaPLaST ® ThE bEST
Halbzeuge und Befestigungselemente
Folien und Platten
bänder und Schnüre
Rohre und Stäbe
Muttern
Rosetten und Scheiben
Schrauben und Distanzstücke
Kappen und Stopfen
Thomafluid ® III - Connectors made of plastics
Tubing olive Connectors
Screw Joints for Pipes
and Tubings
Quick-Release Coupling
Systems
Threaded adapter
Conductive Connectors
Tri-Clamp Connections
ThomaPLaST ® III
Semi-Finished Products
Profiles
adhesives and Lubricants
Greases, adhesives, Pastes,
Cleaners, Etching agents
and Sprays
Fastening Elements
Nuts, Finishing Washers,
Screws, Grub Slotted Screws
and Spacer Elements
ThomaPLaST ® IV
Fastening Elements
Spacer Elements
Bushings
Insulating Spacers / Insulators
Closure Elements
Caps and Plugs
o-Rings
Solid and Encapsulated
THomAFluId ® III
Raccords
monobloc – plastique
Raccords olives :
de tuyau flexible mini
de tuyau
Assemblages vissés :
pour tuyaux flexibles
pour tuyaux textiles
pour tubes
Fixations rapides pour tubes
Adaptateurs filetés
THomAFluId ® IV
Raccords plastique et métaux
Raccords
de tuyau et de tube
Adaptateurs filetés
Assemblages vissés
Fixations rapides
Systèmes d‘accouplement
rapide
THOMAFLUID ® - Manuale II
Tubi per analitica
Tubi per chimica
Tubi per industria
Tubi per medicina
Tubi per farmaceutica
In elastomeri e plastica
Connettori Luer-Lock
Collegamenti capillari
Collegamenti a oliva
Collegamenti filettati
Collegamenti a baionetta
THOMAFLUID ® - Manuale IV
Connettori per tubazioni
Accoppiamenti rapidi
Tecnologia dei fluidi
Flussimetri, contatori , controlli di flusso,
smorzatori di pulsazioni,
trasmettitori di pressione a membrana
Rubinetti e valvole
Rubinetti di intercettazione, di flusso, a sfera,
a più vie; valvole di intercettazione,
di dosaggio, di mantenimento della pressione,
di riduzione della pressione, di dosaggio fine,
a sfera, magnetiche, a membrana,
motorizzate, di non ritorno, schiacciatubi per
tubi flessibili
THOMAFLUID ® - Manuale V
Tecnologia dei fluidi
Flussimetri per liquidi, flussimetri per gas
Raccordi e valvole in
ottone ed acciaio
inossidabile
Rubinetti e valvole, filtri in fritta di vetro per HPLC, fil-
tri a maglia, filtri per tubazioni, raccordi per reazione
post-colonna, rubinetti Luer, connettori Luer, capillari
metallici, connettori capillari, accoppiamenti rapidi
connettori per tubo flessibile, raccordi per tubi
Tecnologia di
alimentazione dei fluidi
Pompe centrifughe, pompe a membrana, pompe per
microdosaggio, pompe ad ingranaggi, pompe
peristaltiche, pompe per vuoto, pompe per alta
pressione, pompe per gas
THOMAFLUID ® - Podręcznik II
węże dla analiz
chemii
przemysłu
medycyny
farmacji
z elastomerów oraz
tworzyw sztucznych
złączki Luer-Lock
do kapilar
oliwkowe
gwintowe
szybkozłączki
THOMAPLAST ® - Podręcznik V
Elementy uszczelniające
Premium
do dużych obciążeń
Technika wysokich mocy
w przemyśle spożywczym,
farmacji i medycynie
Zastosowania zgodne z CIP/SIP
Thomaplast ® -pierścienie
o profilu okrągłym
z EPDM, FKM, VQM, HNBR, NBR,
FFKM, FEP/FKM, FEP/VMQ, PTFE
Thomaplast ® -uszczelki płaskie
z NBR, EPDM, FKM, aramidu, PTFE, grafitu
THOMAFLUID ® - Manual I
Mangueras para análisis
Mangueras para la química
Mangueras industriales
Mangueras para técnica
médica
Mangueras farmacéuticas
de elastómeros
Materiales:
Caucho fluorocarbonado (FPM)
Poliolefinas
Caucho de silicona (SI)
Tejido de fibra de vidrio
PVC (policloruro de vinilo)
EVA (copolímero de etileno y acetato de vinilo)
Copolímero de EPDM/PP
EPDM (caucho de etileno propileno dieno)
PUR (poliuretano)
TPEE (elastómero termoplástico)
Combinación de LDPE/PVC
IIR (caucho de isobutileno-isopreno)
NR (caucho natural)
NBR (caucho de acrilonitrilo-butadieno)
THOMAFLUID ® - Manual II
Mangueras para la analítica
Mangueras para la química
Mangueras industriales
Mangueras para técnicas
médicas
Mangueras farmacéuticas
de elastómeros y plásticos
Conectores Luer-Lock
Conectores para capilares
Conectores de oliva para
mangueras
Racores para mangueras
Conectores de enchufe
THOMAFLUID ® - Příručka II
Hadice pro analýzy
Hadice pro chemikálie
Průmyslové hadice
Hadice pro lékařské přístroje
Hadice pro farmaceutiku
z elastomerů a umělých hmot
Spojky Luer-Lock
Kapilární spojky
Nástrčné hadicové spojky
Šroubení pro hadice
Rychlospojky
Telefonische Unterstützung und Beratung unter: +49 (0) 6221-3125-0
Reichelt Chemietechnik Online-Shop
In unserem Onlineshop können Sie Laborbedarf ohne Mindestbestellwert bestellen. Unsere Kunden aus Deutschland, der Schweiz und Österreich sowie vielen weiteren Ländern vertrauen seit über 30 Jahren auf RCT Reichelt Chemietechnik. Große Auswahl, hohe Qualität, günstige Preise, faire Versandkosten!
