Aufrufe
vor 2 Jahren

RCT Reichelt Chemietechnik GmbH + Co. - Thomaplast III (EN)

  • Text
  • Thomaplast
  • Specification
  • Resistance
  • Technical
  • Length
  • External
  • Elements
  • Fastening
  • Adhesive
  • Screws
ThomaPLaST ® III Semi-Finished Products Profiles adhesives and Lubricants Greases, adhesives, Pastes, Cleaners, Etching agents and Sprays Fastening Elements Nuts, Finishing Washers, Screws, Grub Slotted Screws and Spacer Elements

Adhesives and Lubricants

Adhesives and Lubricants - One-component THOMASANN ® -High-Therm-Silicone Rubber Adhesive Product specification • Excellently suited for extremely high temperatures up to +315 °C. At highest temperatures the physical properties change only slightly. Technical specification • Colour: red • Max. temperature: +260 °C, for a short time +315 °C • Spec. weight: 1.07 • Tearing strength: 400 % • Tear resistance: 7 kg/cm • Dielectric strength: 20 kV/mm • Volume resistivity: 3 x 10 14 ​ Ohm/cm Item Bundle Volume Unit Price ​ ​ g piece EURO 331685 tube 82.8 1 102.00 THOMASANN ® -Silicone Rubber Adhesive - large-scale adhesion Product specification • Particularly suited for large-scale adhesions. • 100 % solvent-free Technical specification • Colour: transparent • Max. temperature: +180 °C, for a short time +250 °C • Spec. weight: 1.09 • Tearing strength: 500 % • Tear resistance: 13 kg/cm • Dielectric strength: 21 kV/mm • Volume resistivity: 8 x 10 14 ​ Ohm/cm Item Bundle Volume Unit Price ​ ​ g piece EURO 27458 tube 90 1 64.00 THOMASANN ® -PVC Adhesive Adhesives Product specification • PeViCol is ideally suitable for adhesion of plastic valves, fittings, pipes and hoses made of PVC, of parts made of the same or different thermoplastics (PVC-U, non-rigid PVC, PVC-C). • PeViCol is used for adhesion of small as well as of very big pipeline components. • PeViCol is pure PVC, dissolved in N-Methyl-2-Pyrrolidon, with thixotrope properties. It has the same temperature and pressure resistance like PVC-U. The adhesions are water, acid and base resistant. • Due to its hygroscopic properties, PeViCol absorbs water or air humidity while setting. The joint becomes white - an excellent visual quality control. • The bonding with PeViCol requires gluing surfaces free of grease and cleaned with blotting paper or crep paper. For this purpose it is recommended to use Tangit ® cleaner (item 350158). • Best application temperature: +10 to +60 °C • Air humidity: 30 - 80 % • Wet life: depends on the air humidity, i.e. the higher the air humidity the shorter the wet life; at +20 °C and 60 % air humidity the wet life is 4 - 5 minutes • Setting time: The setting time may be considerably shortened by turning the jointed parts in reverse direction until a noticeable resistance is felt. The adjustment is to be made with the last rotation. • Loading of glued joint (pipes DN 65): The pressure test or commissioning should be made not earlier than 24 hours after the latest gluing. • Waste disposal and cleaning: Dilute PeViCol rests with water and dispose acc. to regulations. Keep brush airtight. Precipitated PVC is to be disposed like the PVC material. The solvent, at a ratio of 1:100, is degradable. • Recommended protection equipment: Wear gloves made of Neoprene or cream hands with skin cream with oil. In case of splashing danger wear tightly closing protective goggles. Technical specification • Consistency: liquid • Colour: clear/yellowish • Boiling point: +202 °C • Freezing point: -24 °C • Flashing point: +93 °C • Lower Ex-limit: 1.3 Vol.-% • Upper Ex-limit: 9.5 Vol.-% • Auto ignition temperature: +346 °C • Saturated vapour pressure: 0.053 mbar (+20 °C) • Saturation concentration: 525 ppm • Viscosity: 9,000 mPas (+23 °C) • Density: 1.08 g/cm 3 (+23 °C) • Water solubility (solvent): 100 % • Solvent content: 80 % • Solids content: 20 % • Acid resistance of glued joints: sulphuric acid up to 80 %, hydrochloric acid up to 36 %, nitric acid up to 45 %, hydrofluoric acid up to 10 % • Delivery form: standard in PE bottles • Minimum durability: 12 months after filling • Safety note: safety data sheet (print 310 129) acc. to 91/155/EWG • Regulations: DIN 16970, BS 6209 and BS 6920, approved up to PN 16; ​ ASTM D 2564-96a (97) and NSF-61, point 9 (toxicity); NS 2944, point 6.4 20 THOMAPLAST ® III - 2015

Adhesives and Lubricants - One-component Adhesives Item Volume Unit Price ​ g piece EURO 350156 500 1 60.00 350157 1,000 1 116.00 THOMASANN ® -High-Tech Cyanoacrylate Adhesive - Standard Plastics Item Volume Unit Price ​ g piece EURO 350152 500 1 68.00 350153 115 1 44.00 Tangit ® -PVC-U Adhesive Product specification • Solvent-containing special adhesive based on THF (tetrahydrofuran, stabilized) for tensile-resistant connection between pressure pipes (e.g. drinking water and gas pipes) and pipe couplings made of PVC-U, and for adhesive bonding of conduits, sewage pipes, eaves gutters etc. made of this material. The cured adhesive meets the conditions of admission for drinking water supply via PVC-U pipes acc. to Recommendation No. VIII issued by the Plastics Committee of the German Health Office. • The bonding with Tangit ® PVC-U adhesive requires gluing surfaces free of grease and cleaned with blotting paper or crep paper. For this purpose it is recommended to use Tangit ® cleaner (item 350158). Technical specification • Raw material basis: PVC-U (polyvinyl chloride, free of plasticizers), THF (tetrahydrofuran, stabilized), methyl ethyl ketone, cyclohexanone • Density: approx. 0.96 g/ml • Temperature range: -15 to +60 °C • Viscosity: 1800 - 3500 mPas (at +23 °C) • Resistibility: waterproof • Storage: should not be stored at temperatures below +5 ºC since this leads to a higher viscosity and thickening of the adhesive, thus affecting its workability • Shelf life: at +20 °C at least 12 months for Tangit in tubes and 24 months for Tangit ® in tins from the date of filling • Regulations: Complies with DIN 16970, KRV Guideline R 1.1.7 and the principles for the construction and testing of drainage pipes; meets the ​ requirements of BS 4346, Part 3, and ASTM D 2564, NEN 7106 Product specification • Very quickly curing low-viscous adhesive on cyanoacrylic acid methyl ester basis with pronounced capillary passing properties, especially for plastics/plastics Technical specification • Viscosity: approx. 2 mPas • Spec. weight: 1.01 • Flash point: +83 °C • Danger class: A III (VbF) • Refractive index: 1.845 • Softening temperature: >+175 °C • Thermal coefficient of expansion: 1.26 x 10 -4 /K (ASTM-D-695) • Thermal conductivity: 0.25 W/mK (DIN 52612/1) • Resistivity: 6.1 x 10 -4 Ohm cm 2 (at 10 MHz) (DIN 53482) • Dielectric constant: 3.50 (at 10 MHz) (DIN 53480) • Track resistance: KA 1 (DIN 53480) • Curing time for adhesive bonding of: ABS 12 sec.; PA 20 sec.; PVC (rigid) 7 sec. • Tensile strength for adhesive bonding of: ABS 18.4 N/mm 2 ; PA 8.2 N/mm 2 ; PVC (rigid) 35.5 N/mm 2 • Tensile/shear strength for adhesive bonding of: ABS 5.4 N/mm 2 (break of material); PA 4.3 N/mm 2 ; PVC (rigid) 5.5 N/mm 2 (break of material) • ​ Shelf life: 6 months at +20 °C, 12 months at

RCT Reichelt Chemietechnik GmbH Co.

RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid I
RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid II
RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid III
RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid IV
RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid V
RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid Pumpen
RCT Reichelt Chemietechnik GmbH + Co. - Thomaplast I
RCT Reichelt Chemietechnik GmbH + Co. - Thomaplast II
RCT Reichelt Chemietechnik GmbH + Co. - Thomaplast III
RCT Reichelt Chemietechnik GmbH + Co. - Thomaplast IV
RCT Reichelt Chemietechnik GmbH + Co. - Thomaplast V
RCT Reichelt Chemietechnik GmbH + Co. - Thomapor
RCT Reichelt Chemietechnik GmbH + Co. - Thomadrive
RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid THE BEST Schläuche
RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid THE BEST Verbinder
RCT Reichelt Chemietechnik GmbH + Co. - Thomaplast THE BEST Halbzeuge und Befestigungselemente
RCT Reichelt Chemietechnik GmbH + Co. - Alle Kataloge
RCT Reichelt Chemietechnik GmbH + Co. - Complete Programme (EN)
RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid I (EN)
RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid II (EN)
RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid III (EN)
RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid IV (EN)
RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid Pumps (EN)
RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid V (EN)
RCT Reichelt Chemietechnik GmbH + Co. - Thomaplast I (EN)
RCT Reichelt Chemietechnik GmbH + Co. - Thomaplast II (EN)
RCT Reichelt Chemietechnik GmbH + Co. - Thomaplast III (EN)
RCT Reichelt Chemietechnik GmbH + Co. - Thomaplast IV (EN)
RCT Reichelt Chemietechnik GmbH + Co. - Thomapor (EN)
RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid I (FI)
RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid II (FI)
RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid I (FR)
RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid II (FR)
RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid III (FR)
RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid IV (FR)
RCT Reichelt Chemietechnik GmbH + Co. - Programme global (FR)
RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid I (IT)
RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid II (IT)
RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid III (IT)
RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid IV (IT)
RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid V (IT)
RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid I (PL)
RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid II (PL)
RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid III (PL)
RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid IV (PL)
RCT Reichelt Chemietechnik GmbH + Co. - Thomaplast I (PL)
RCT Reichelt Chemietechnik GmbH + Co. - Thomaplast II (PL)
RCT Reichelt Chemietechnik GmbH + Co. - Thomaplast III (PL)
RCT Reichelt Chemietechnik GmbH + Co. - Thomaplast IV (PL)
RCT Reichelt Chemietechnik GmbH + Co. - Thomaplast V (PL)
RCT Reichelt Chemietechnik GmbH + Co. - Thomapor (PL)
RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid (RU)
RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid I (ES)
RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid II (ES)
RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid III (ES)
RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid I (CZ)
RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid II (CZ)
RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid I (TR)
RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid II (TR)
RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid I (HU)
RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid II (HU)

Reichelt Chemietechnik Online-Shop

In unserem Onlineshop können Sie Laborbedarf ohne Mindestbestellwert bestellen. Unsere Kunden aus Deutschland, der Schweiz und Österreich sowie vielen weiteren Ländern vertrauen seit über 30 Jahren auf RCT Reichelt Chemietechnik. Große Auswahl, hohe Qualität, günstige Preise, faire Versandkosten!

* Alle Preise verstehen sich zzgl. Mehrwertsteuer und Versandkosten und ggf. Nachnahmegebühren, wenn nicht anders beschrieben. Copyright © - Alle Rechte vorbehalten