ThomaPLaST ® III
Semi-Finished Products
Profiles
adhesives and Lubricants
Greases, adhesives, Pastes,
Cleaners, Etching agents
and Sprays
Fastening Elements
Nuts, Finishing Washers,
Screws, Grub Slotted Screws
and Spacer Elements
Adhesives and Lubricants
Adhesives and Lubricants THOMASANN ® -Silver Spray Application area • For screw joints, seals, valve packings and other connections in piping systems • Screw connections at busbars Product specification • High-temperature lubricant in spray form • Contains pure colloidal metals in a lubricant carrier with anti-corrosion and antioxidant additives • Forms a tight film closing irregularities and pores, thus preventing the ingress of moisture into fits and joints • Coatings are resistant to alkalis, most acids and steam Technical specification • Temperature range: -180 to +1200 °C • Pressure resistance: 2300 kp/cm Item Volume Unit Price ml piece EURO 70291 400 1 72.00 THOMASANN ® -Anti Spatter Product specification • Prevents the adhesion of weld spatter and slag to welding torches, workpieces, jigs and accessories • Improves the stability of the arc during gas-shielded arc welding • Prevents the obstruction of the welding nozzle • Does not affect finishing processes or painting • Saves time by easy removal of weld spatter and slag from metal surfaces • Silicone-free Item Volume Unit Price ml piece EURO 70302 500 1 41.00 THOMASANN ® -Leak Detection Spray Application area • For tracing leaks in gas and pressurised air lines Product specification • A leak detection spray with corrosion inhibitor making leaks visible by foam formation. It is non-flammable because the active agent consists of a pure aqueous solution; toxicologically safe, skin-friendly and non-corrosive. The leak detector does not form any hazardous and corrosion-promoting compounds in contact with iron, aluminium, copper, brass, carbon dioxide, propane, butane, acetylene, compressed air, city gas, natural gas, nitrogen, nitrogen oxides, as well as all available refrigerants and can also be used with oxygen. • Propellent is pure compressed air, thus environmentally friendly Fastening Elements Nuts THOMAPLAST ® -Nuts made of PA 6.6 Sprays General product specification • Good coefficient of sliding friction • High mechanical stability and fatigue strength • Excellent resilience, impact resistant • Resistant to abrasion, resistant to cold • Chemical features: Good resistance to weak alkalis, but only moderate resistance to strong alkalis; resistant to aromatic and aliphatic hydrocarbons, fuels, mineral oils and mineral lubricants; suitable for alcohols, esters, ketones, ethers and amines • Material specification of polyamide 6.6: The polyamides are universal materials for mechanical functional parts The temperature resistance of polyamide (from -30 to +100 °C, for a short time +120 °C) allows use in many industries Connecting parts made of polyamide and similar plastics protect from rust and corrosion damage Insulating properties and an amazingly high tensile strength PA can also be used in the food processing industry and in medical fields Resistant to corrosion and abrasion Non-toxic and unmagnetic Vibration-damping PA 6.6 features the same chemical resistance as PA 6 PA 6.6 has a higher hardness, abrasion resistance, and a little higher operating temperature than PA 6 However, PA 6.6 is a little less impact resistant compared to PA 6 General technical specification • Material: PA 6.6 (polyamide 6.6) • Density: 1.14 g/cm 3 (DIN 53479) • Temperature range: -30 to +100 °C • Melting temperature: +255 °C (DIN 53736) • Yield stress: 83 N/mm 2 (ISO 527) • Elongation at break: 30 % (DIN 53455) • Bending strength: 115 N/mm 2 (DIN 53452) • Elastic modulus: 3,000 N/mm 2 (DIN 53457) • Impact resistance (Charpy): without break (DIN 53453) • Notch impact strength (Izod): 60 J/m (ASTM D 256) • Coefficient of sliding friction against steel (dry): 0.35 – 0.42 • Dielectric loss factor (at 1 MHz): 0.025 (DIN 53483) • Volume resistivity: 10 15 Ohm x cm (DIN 53482) • Surface resistance: approx. 10 14 Ohm (DIN 53482) • Comparative tracking index (CTI): >600 V (IEC 112) • Dielectric strength: approx. 40 kV/mm (DIN 53481) • Water absorption (saturation): approx. 8.5 % (DIN 53495) • Moisture absorption (s.c.a.-saturation): approx. 2.9 % (DIN 53714) THOMAPLAST ® -Hex Nut (DIN 934) made of PA Item Volume Unit Price ml piece EURO 70304 400 1 15.00 28 THOMAPLAST ® III - 2015
Fastening Elements Technical specification • Material: PA 6.6 (polyamide 6.6) • Colour: natural • Regulations: DIN 934, ISO 4034/4032, NFE 27411, NFE 24032 Item Internal thread H WAF Unit Price mm mm piece EURO 309144 M2 x 0.4 1.6 4 50 36.00 309145 M2 x 0.4 1.6 4 100 62.00 309146 M2.5 x 0.45 2 5 50 36.00 309147 M2.5 x 0.45 2 5 100 62.00 301511 M3 x 0.5 2.4 5.5 50 24.00 301512 M3 x 0.5 2.4 5.5 100 40.00 301513 M4 x 0.7 3.2 7 50 24.00 301514 M4 x 0.7 3.2 7 100 40.00 301515 M5 x 0.8 4.2 8 50 24.00 301516 M5 x 0.8 4.2 8 100 40.00 301517 M6 x 1 5 10 50 24.00 301518 M6 x 1 5 10 100 40.00 301519 M8 x 1.25 6.5 13 25 29.00 301520 M8 x 1.25 6.5 13 50 49.00 301521 M10 x 1.5 8 17 25 32.00 301522 M10 x 1.5 8 17 50 54.00 309148 M12 x 1.75 10.8 18 25 32.00 309149 M12 x 1.75 10.8 18 50 54.00 309150 M16 x 2 14.8 24 25 50.00 309151 M16 x 2 14.8 24 50 84.00 309152 M20 x 2.5 18 30 10 50.00 309153 M20 x 2.5 18 30 20 84.00 THOMAPLAST ® -Hex Washer Faced Nut made of PA Product specification • Nut and washer in one piece • Quick assembly • Suitable for awkward locations or automated assembly Technical specification • Material: PA 6.6 (polyamide 6.6) • Colour: natural Nuts Item Internal D H h WAF Unit Price thread (SW) mm mm mm mm piece EURO 305818 M8 x 1.25 17 8 1.2 13 25 38.00 305819 M8 x 1.25 17 8 1.2 13 50 65.00 305821 M10 x 1.5 22 9.5 1.85 17 25 43.00 305822 M10 x 1.5 22 9.5 1.85 17 50 72.00 305824 M12 x 1.75 28 14.4 3 18.7 25 59.00 305825 M12 x 1.75 28 14.4 3 18.7 50 99.00 305826 M16 x 2 36 15.8 3.3 23.7 10 37.00 305827 M16 x 2 36 15.8 3.3 23.7 20 63.00 THOMAPLAST ® -Hex Lock Nut made of PA - self-locking Technical specification • Material: PA 6.6 (polyamide 6.6) • Colour: natural Item Internal D H WAF Unit Price thread mm mm mm piece EURO 338179 M3 x 0.5 6.9 4.7 6 25 38.00 338180 M3 x 0.5 6.9 4.7 6 50 66.00 338181 M4 x 0.7 8.3 5.5 7 25 30.00 338182 M4 x 0.7 8.3 5.5 7 50 48.00 338183 M5 x 0.8 9.5 6.5 8 25 38.00 338184 M5 x 0.8 9.5 6.5 8 50 66.00 338185 M6 x 1 11.4 7.3 10 25 38.00 338186 M6 x 1 11.4 7.3 10 50 66.00 338187 M8 x 1.25 16.2 9 14 25 42.00 338188 M8 x 1.25 16.2 9 14 50 74.00 THOMAPLAST ® -Hex Nut made of PA - flat Technical specification • Material: PA 6.6 (polyamide 6.6) • Colour: black Item Internal D H h WAF Unit Price thread (SW) mm mm mm mm piece EURO 305809 M4 x 0.7 8.8 3.8 1 7 25 29.00 305810 M4 x 0.7 8.8 3.8 1 7 50 50.00 305812 M5 x 0.8 9.8 5 1 8 25 30.00 305813 M5 x 0.8 9.8 5 1 8 50 51.00 305815 M6 x 1 13 6 0.95 10 25 38.00 305816 M6 x 1 13 6 0.95 10 50 65.00 THOMAPLAST ® III - 2015 29
ThoMafluid ® III - Verbinder aus Kunststoff
Schlaucholivenverbinder
Verschrau bungen für
Schläuche und Rohre
(metrisch und zöllig)
Schnell verbinder für Rohre
Gewindeadapter
leitfähige Verschraubungen
Tri-Clamp-Verbinder
ThoMaPLaST ® IV
Befestigungselemente
Distanzelemente
Isolierhülsen und -stützer
Isolatoren
Verschlusselemente
Kappen und Stopfen
o-Ringe
Vollmaterial und ummantelt
THoMafluId ® THE bEsT
schläuche aus Elastomeren und Kunststoffen
analytikschläuche
druckschläuche
Hochtemperaturschläuche
Isolierschläuche
Katheterschläuche
laborschläuche
lebensmittelschläuche
Pharmaschläuche
Pumpenschläuche
Wellschläuche
Werkstoffe:
CR EPdM EPdM/PP EVa fEP fPM IIR Mfa
NbR NR Pa PE PEEK Pfa PI Polyolefin PP
PTfE PuR PVC PVdf silikon TPE-E
ThoMafluid ® ThE bEsT
Verbinder aus Kunststoff und Metall
luer-/lock-Verbinder
schlauchtüllen
Verschrau bungen für schläuche
und Rohre (metrisch und zöllig)
steckverbinder für Rohre
Gewindeadapter
leitfähige Verschraubungen
Tri-Clamp-Verbinder
schnellverschlusskupplungen
ThoMaPLaST ® ThE bEST
Halbzeuge und Befestigungselemente
Folien und Platten
bänder und Schnüre
Rohre und Stäbe
Muttern
Rosetten und Scheiben
Schrauben und Distanzstücke
Kappen und Stopfen
Thomafluid ® III - Connectors made of plastics
Tubing olive Connectors
Screw Joints for Pipes
and Tubings
Quick-Release Coupling
Systems
Threaded adapter
Conductive Connectors
Tri-Clamp Connections
ThomaPLaST ® III
Semi-Finished Products
Profiles
adhesives and Lubricants
Greases, adhesives, Pastes,
Cleaners, Etching agents
and Sprays
Fastening Elements
Nuts, Finishing Washers,
Screws, Grub Slotted Screws
and Spacer Elements
ThomaPLaST ® IV
Fastening Elements
Spacer Elements
Bushings
Insulating Spacers / Insulators
Closure Elements
Caps and Plugs
o-Rings
Solid and Encapsulated
THomAFluId ® III
Raccords
monobloc – plastique
Raccords olives :
de tuyau flexible mini
de tuyau
Assemblages vissés :
pour tuyaux flexibles
pour tuyaux textiles
pour tubes
Fixations rapides pour tubes
Adaptateurs filetés
THomAFluId ® IV
Raccords plastique et métaux
Raccords
de tuyau et de tube
Adaptateurs filetés
Assemblages vissés
Fixations rapides
Systèmes d‘accouplement
rapide
ThomAfluid ® - Programme global
Tuyaux en élastomères et
Tuyaux en plastiques
Raccords luer/lock
Raccords de tubes capillaire (hPlC)
Raccords olives
Assemblages vissés
fixations rapides pour tubes
Adaptateurs filetés
Systèmes d‘accouplement rapide
THOMAFLUID ® - Manuale II
Tubi per analitica
Tubi per chimica
Tubi per industria
Tubi per medicina
Tubi per farmaceutica
In elastomeri e plastica
Connettori Luer-Lock
Collegamenti capillari
Collegamenti a oliva
Collegamenti filettati
Collegamenti a baionetta
THOMAFLUID ® - Manuale IV
Connettori per tubazioni
Accoppiamenti rapidi
Tecnologia dei fluidi
Flussimetri, contatori , controlli di flusso,
smorzatori di pulsazioni,
trasmettitori di pressione a membrana
Rubinetti e valvole
Rubinetti di intercettazione, di flusso, a sfera,
a più vie; valvole di intercettazione,
di dosaggio, di mantenimento della pressione,
di riduzione della pressione, di dosaggio fine,
a sfera, magnetiche, a membrana,
motorizzate, di non ritorno, schiacciatubi per
tubi flessibili
THOMAFLUID ® - Manuale V
Tecnologia dei fluidi
Flussimetri per liquidi, flussimetri per gas
Raccordi e valvole in
ottone ed acciaio
inossidabile
Rubinetti e valvole, filtri in fritta di vetro per HPLC, fil-
tri a maglia, filtri per tubazioni, raccordi per reazione
post-colonna, rubinetti Luer, connettori Luer, capillari
metallici, connettori capillari, accoppiamenti rapidi
connettori per tubo flessibile, raccordi per tubi
Tecnologia di
alimentazione dei fluidi
Pompe centrifughe, pompe a membrana, pompe per
microdosaggio, pompe ad ingranaggi, pompe
peristaltiche, pompe per vuoto, pompe per alta
pressione, pompe per gas
THOMAFLUID ® - Podręcznik II
węże dla analiz
chemii
przemysłu
medycyny
farmacji
z elastomerów oraz
tworzyw sztucznych
złączki Luer-Lock
do kapilar
oliwkowe
gwintowe
szybkozłączki
THOMAPLAST ® - Podręcznik V
Elementy uszczelniające
Premium
do dużych obciążeń
Technika wysokich mocy
w przemyśle spożywczym,
farmacji i medycynie
Zastosowania zgodne z CIP/SIP
Thomaplast ® -pierścienie
o profilu okrągłym
z EPDM, FKM, VQM, HNBR, NBR,
FFKM, FEP/FKM, FEP/VMQ, PTFE
Thomaplast ® -uszczelki płaskie
z NBR, EPDM, FKM, aramidu, PTFE, grafitu
THOMAFLUID ® - Manual I
Mangueras para análisis
Mangueras para la química
Mangueras industriales
Mangueras para técnica
médica
Mangueras farmacéuticas
de elastómeros
Materiales:
Caucho fluorocarbonado (FPM)
Poliolefinas
Caucho de silicona (SI)
Tejido de fibra de vidrio
PVC (policloruro de vinilo)
EVA (copolímero de etileno y acetato de vinilo)
Copolímero de EPDM/PP
EPDM (caucho de etileno propileno dieno)
PUR (poliuretano)
TPEE (elastómero termoplástico)
Combinación de LDPE/PVC
IIR (caucho de isobutileno-isopreno)
NR (caucho natural)
NBR (caucho de acrilonitrilo-butadieno)
THOMAFLUID ® - Manual II
Mangueras para la analítica
Mangueras para la química
Mangueras industriales
Mangueras para técnicas
médicas
Mangueras farmacéuticas
de elastómeros y plásticos
Conectores Luer-Lock
Conectores para capilares
Conectores de oliva para
mangueras
Racores para mangueras
Conectores de enchufe
THOMAFLUID ® - Příručka II
Hadice pro analýzy
Hadice pro chemikálie
Průmyslové hadice
Hadice pro lékařské přístroje
Hadice pro farmaceutiku
z elastomerů a umělých hmot
Spojky Luer-Lock
Kapilární spojky
Nástrčné hadicové spojky
Šroubení pro hadice
Rychlospojky
Telefonische Unterstützung und Beratung unter: +49 (0) 6221-3125-0
Reichelt Chemietechnik Online-Shop
In unserem Onlineshop können Sie Laborbedarf ohne Mindestbestellwert bestellen. Unsere Kunden aus Deutschland, der Schweiz und Österreich sowie vielen weiteren Ländern vertrauen seit über 30 Jahren auf RCT Reichelt Chemietechnik. Große Auswahl, hohe Qualität, günstige Preise, faire Versandkosten!
