Fastening Elements THOMAPLAST ® -Washer (DIN 125) made of rigid PVC Product specification • Good electrical insulation • Low water absorption • High impact resistance • Good resistance to UV radiation • Self-extinguishing, flame-retardant • Chemical features: Very good resistance to weak and strong alkalis and acids (but only limited resistance to hydrofluoric acid) as well as mineral oils, fats, oils and aliphatic hydrocarbons; limited resistance to oxidizing and organic acids as well as fuels; not resistant to aromatic and chlorinated hydrocarbons, ketones and aldehydes; very good resistance to weather and direct sunlight. • Material specification: High mechanical stability, stiffness and hardness Resistant to aging and durable PVC products usually feature quite a good resistance to weather and direct sunlight Up to +80 °C rigid, up to +165 °C plasticized Rigid PVC can be bended, drilled, welded, bonded and painted High chemical resistance Technical specification • Material: PVC rigid (polyvinyl chloride, rigid) • Colour: white • Density: 1.38 - 1.55 g/cm 3 • Shore hardness D: 83° - 90° • Temperature range: from -5 to +75 °C, for a short time +100 °C • Elastic modulus: 3,000 MPa (ISO 527) • Tensile strength: 55 - 75 N/mm 3 (DIN 53455) • Elongation at break: 10 - 20 % (DIN 53455) • Ball pressure hardness, 10-sec. value: 75 - 155 N/mm 3 (DIN 53456) • Coefficient of sliding friction against steel (dry): approx. 0.6 (relative) • Surface resistance: 10 13 Ohm (DIN 53482) • Volume resistivity: >10 15 Ohm x cm (DIN 53482) • Dielectric strength: 40 - 50 kV/mm (DIN 53481) • Dielectric constant: 3.2 - 3.7 at 50 Hz • Regulations: DIN 125, DIN 34815, ISO 7089 Item For d D h Unit Price thread mm mm mm piece EURO 306766 M3 3.2 7 0.5 50 8.00 306767 M3 3.2 7 0.5 100 12.00 306768 M4 4.3 9 1 50 8.00 306769 M4 4.3 9 1 100 12.00 306770 M5 5.3 10 1 50 8.00 306771 M5 5.3 10 1 100 12.00 306772 M6 6.4 12.5 1.5 50 14.00 Washers and Rings Item For d D h Unit Price thread mm mm mm piece EURO 306773 M6 6.4 12.5 1.5 100 22.00 306774 M8 8.4 17 1.5 50 24.00 306775 M8 8.4 17 1.5 100 40.00 306776 M10 10.5 21 2 50 28.00 306777 M10 10.5 21 2 100 50.00 306778 M12 13 24 2.5 50 46.00 306779 M12 13 24 2.5 100 80.00 306780 M16 17 30 3 25 32.00 306781 M16 17 30 3 50 56.00 THOMAPLAST ® -Washer (DIN 125) made of HDPE Technical specification • Material: HDPE (polyethylene, rigid, high density) • Colour: natural • Regulations: DIN 125, DIN 34815, ISO 7089 Item For d D h Unit Price thread mm mm mm piece EURO 306706 M3 3.2 7 0.5 50 10.00 306707 M3 3.2 7 0.5 100 15.00 306708 M4 4.3 9 0.8 50 10.00 306709 M4 4.3 9 0.8 100 15.00 306710 M5 5.3 10 1 50 10.00 306711 M5 5.3 10 1 100 15.00 306712 M6 6.4 12.5 1.6 50 10.00 306713 M6 6.4 12.5 1.6 100 15.00 306714 M8 8.4 17 1.6 50 17.00 306715 M8 8.4 17 1.6 100 28.00 306716 M10 10.5 21 2 50 20.00 306717 M10 10.5 21 2 100 34.00 306718 M12 13 24 2.5 50 26.00 306719 M12 13 24 2.5 100 44.00 306720 M16 17 30 3 50 30.00 306721 M16 17 30 3 100 52.00 THOMAPLAST ® -Washer (DIN 125) made of PA Technical specification • Material: PA 6 (polyamide 6) • Colour: natural • Regulations: DIN 125, DIN 34815, ISO 7089 46 THOMAPLAST ® III - 2015
Fastening Elements Washers and Rings Item For d D h Unit Price thread mm mm mm piece EURO 305828 M1.6 1.7 4 0.3 50 24.00 305829 M1.6 1.7 4 0.3 100 40.00 305832 M1.7 1.8 4.5 0.3 50 24.00 305835 M1.7 1.8 4.5 0.3 100 40.00 305838 M2 2.2 5 0.3 50 6.00 305841 M2 2.2 5 0.3 100 10.00 308940 M2.3 2.5 6 0.5 50 6.00 308941 M2.3 2.5 6 0.5 100 10.00 308942 M2.5 2.7 6 0.5 50 6.00 308943 M2.5 2.7 6 0.5 100 10.00 305844 M2.6 2.8 7 0.5 50 8.00 305847 M2.6 2.8 7 0.5 100 14.00 301523 M3 3.2 7 0.5 50 6.00 301524 M3 3.2 7 0.5 100 10.00 305850 M3.5 3.7 8 0.5 50 8.00 305853 M3.5 3.7 8 0.5 100 14.00 301525 M4 4.3 9 0.8 50 8.00 301526 M4 4.3 9 0.8 100 14.00 301527 M5 5.3 10 1 50 8.00 301528 M5 5.3 10 1 100 14.00 308946 M6 6.4 12 1.6 50 8.00 308947 M6 6.4 12 1.6 100 14.00 301529 M6 6.4 12.5 1.6 50 8.00 301530 M6 6.4 12.5 1.6 100 14.00 308948 M7 7.4 14 1.5 50 8.00 308949 M7 7.4 14 1.5 100 14.00 308950 M8 8.4 16 1.6 50 9.00 308951 M8 8.4 16 1.6 100 16.00 301531 M8 8.4 17 1.6 50 10.00 301532 M8 8.4 17 1.6 100 18.00 308952 M10 10.5 20 2 50 10.00 308953 M10 10.5 20 2 100 18.00 301533 M10 10.5 21 2 50 11.00 301534 M10 10.5 21 2 100 19.00 305886 M12 13 24 2.5 50 22.00 305889 M12 13 24 2.5 100 38.00 308954 M14 15 30 3 50 30.00 308955 M14 15 20 3 100 52.00 305892 M16 17 30 3 50 36.00 305895 M16 17 30 3 100 60.00 308956 M18 19 34 3 50 36.00 308957 M18 19 34 3 100 60.00 308958 M20 21 37 3 50 38.00 308959 M20 21 37 3 100 74.00 305898 M22 23 39 3 50 42.00 Item For d D h Unit Price thread mm mm mm piece EURO 305901 M22 23 39 3 100 82.00 308960 M24 25 44 4 25 30.00 308961 M24 25 44 4 50 52.00 308962 M26 27 50 4 10 42.00 308963 M26 27 50 4 25 86.00 308964 M27 28 50 4 25 42.00 308965 M27 28 50 4 50 70.00 308966 M30 31 56 4 25 38.00 308967 M30 31 56 4 50 66.00 THOMAPLAST ® -Washer (DIN 125) made of PP Product specification • Universal washers or spacer rings • Absorb vibrations • Complete damping and distance keeping • Good resistance to stress cracking Technical specification • Material: PP (polypropylene) • Colour: natural • Regulations: DIN 125, DIN 34815, ISO 7089 Item For d D h Unit Price thread mm mm mm piece EURO 337623 M2.5 2.7 6 0.5 50 24.00 337624 M2.5 2.7 6 0.5 100 42.00 337625 M3 3.2 7 0.5 50 24.00 337626 M3 3.2 7 0.5 100 42.00 337627 M3.5 3.7 8 0.5 50 24.00 337628 M3.5 3.7 8 0.5 100 42.00 337629 M4 4.3 9 0.8 50 24.00 337630 M4 4.3 9 0.8 100 42.00 337631 M5 5.3 10 1 50 24.00 337632 M5 5.3 10 1 100 42.00 337633 M6 6.4 12.5 1.6 50 24.00 337634 M6 6.4 12.5 1.6 100 42.00 337635 M8 8.4 17 1.6 50 24.00 337636 M8 8.4 17 1.6 100 42.00 337637 M10 10.5 21 2 50 24.00 337638 M10 10.5 21 2 100 42.00 337639 M12 13 24 2.5 50 24.00 337640 M12 13 24 2.5 100 42.00 337641 M14 15 30 3 50 28.00 337642 M14 15 30 3 100 46.00 THOMAPLAST ® III - 2015 47
Fastening Elements Screws Item Exte
Fastening Elements Screws Item Exte
Fastening Elements Grub Slotted Scr
Fastening Elements Technical specif
Fastening Elements Technical specif
Fastening Elements Spacer Elements
Fastening Elements Spacer Elements
Fastening Elements Spacer Elements
ThomaPLAST ® III To provide you wi
Laden...
Laden...
Laden...
ThoMafluid ® I - Schläuche aus Elastomeren laborschläuche druckschläuche Pharmaschläuche Pumpenschläuche Werkstoffe: CR - Chloropren-Kautschuk EPdM - Ethylen-Propylen-Dien-Kautschuk EPdM/PP - Copolymer EVa - Ethylen-Vinyl-Acetat fPM - Fluor-Kautschuk Glasgewebe iiR - Butyl NBR - Butadien-Acrylnitril NR - Naturgummi Polyolefin PuR - Polyurethan PVC - Polyvinylchlorid SBR - Styrol-Butadien-Kautschuk
ThoMafluid ® II Schläuche und Rohre analytikschläuche druckschläuche Pharmaschläuche Wellschläuche Elastomere: Silikon und TPEE Kunststoffe: ETfE, fEP, Mfa, Pa, PE, PEEK, Pfa Pi, PP, PTfE und PVdf Metalle: Edelstahl und Titan Verbinder luer-/lock Kapillar (hPlC) Mini-Schlaucholivenverbinder
ThoMafluid ® III - Verbinder aus Kunststoff Schlaucholivenverbinder Verschrau bungen für Schläuche und Rohre (metrisch und zöllig) Schnell verbinder für Rohre Gewindeadapter leitfähige Verschraubungen Tri-Clamp-Verbinder
ThoMafluid ® IV - Verbinder und Hähne aus Kunststoff und Metall Einteilige Verbinder: • luer-/lock-Verbinder • Schlauchtüllen • Verschraubungen • Schnellverbinder • Kapillarverbinder (hPlC) • Klebe- und Schweißverbinder Zweiteilige Verbinder: Schnellverschlusskupplungen • PoM, PP, PSu, PVdf, Pa • Messing und Edelstahl absperrhähne
ThoMafluid ® V Hähne und Ventile • Mehrweghähne • Kugelhähne • Magnetventile • Regulierventile • Rückschlagventile Durchflussmesser • durchflussanzeiger • Elektr. durchflussmesser • Schwebekörper-durchflussmesser Pumpen • fasspumpen • hand- und fußpumpen • Kolbenpumpen • Schlauchpumpen • Wasserstrahlpumpen
THoMafluId ® - Pumpen fasspumpen Gaspumpen Hand- und fußpumpen Kreiselpumpen Kolbenpumpen Membranpumpen Schlauchpumpen Wasserstrahlpumpen Zahnradpumpen
ThoMaPLaST ® I Laborplastik Flaschen, Ballons, Becher Trichter, Röhrchen, Dosen Schaufeln, Löffel, Spatel Rühr- und Mischhilfen Laborstopfen und -kappen arbeitshilfen Filtration Dialysematerialien Filtergehäuse und -kerzen Ionenaustauscher Sinterelemente Siebgewebe
ThoMaPLaST ® II - Halbzeuge Folien und Platten Stäbe und Rohre Schnüre und Profile Werkstoffgruppen: Elastomer, Kunststoff, Glasseide, Keramik, Metall, Moosgummi, Zellkautschuk, Synthetik, Natur-Material
ThoMaPLaST ® III Halbzeuge Profile Kleb- und Schmierstoffe Fette, Kleber, Pasten, Reiniger, Ätzmittel und Sprays Befestigungselemente Muttern, Rosetten, Scheiben, Schrauben, Gewindestifte, Distanzelemente
ThoMaPLaST ® IV Befestigungselemente Distanzelemente Isolierhülsen und -stützer Isolatoren Verschlusselemente Kappen und Stopfen o-Ringe Vollmaterial und ummantelt
ThoMaPLaST ® V - Dichtungen o-Ringe EPDM, FEP/FPM, FEP/VMQ, FFKM, FPM, hNBR, NBR, PTFE und VMQ Clampdichtungen EPDM und NBR Flachdichtungen aramid, EPDM, FPM, NBR, PTFE und Graphit Milchrohrverschraubungsringe NBR, EPDM, FPM, VMQ und PTFE
THoMaPoR ® - Filtration Dialyseschläuche Membranen Ionenaustauscher Siebgewebe Sintermaterial Filterkerzen Filtergehäuse Gasreinigungstechnik Flüssig-Chromatographie
ThoMaDRIVE ® - antriebstechnik Rollenketten Kettenräder Zahnriemen Zahnräder und -stangen Spannsätze Buchsen Wellengelenke
THoMafluId ® THE bEsT schläuche aus Elastomeren und Kunststoffen analytikschläuche druckschläuche Hochtemperaturschläuche Isolierschläuche Katheterschläuche laborschläuche lebensmittelschläuche Pharmaschläuche Pumpenschläuche Wellschläuche Werkstoffe: CR EPdM EPdM/PP EVa fEP fPM IIR Mfa NbR NR Pa PE PEEK Pfa PI Polyolefin PP PTfE PuR PVC PVdf silikon TPE-E
ThoMafluid ® ThE bEsT Verbinder aus Kunststoff und Metall luer-/lock-Verbinder schlauchtüllen Verschrau bungen für schläuche und Rohre (metrisch und zöllig) steckverbinder für Rohre Gewindeadapter leitfähige Verschraubungen Tri-Clamp-Verbinder schnellverschlusskupplungen
ThoMaPLaST ® ThE bEST Halbzeuge und Befestigungselemente Folien und Platten bänder und Schnüre Rohre und Stäbe Muttern Rosetten und Scheiben Schrauben und Distanzstücke Kappen und Stopfen
ThoMafluid ® Gesamtprogramm Schläuche Verbinder hähne und Ventile durchflussmesser Pumpen laborplastik halbzeuge Kleb- und Schmierstoffe Befestigungselemente Verschlusselemente dichtungen Trenntechnik antriebstechnik
Thomafluid ® - Complete Programme Tubings and Pipes Connectors Cocks and Valves flowmeters Pumps laboratory Plastics Semi-finished Products adhesives and lubricants fastening Elements Closure Elements Gaskets Separation Technology drive Technology
Thomafluid ® I - Tubings made of elastomers Laboratory Tubings Pressure Tubings Pharmaceutical Tubing Pump Tubings Materials: CR - chloroprene rubber EPdm - ethylene-propylene-diene rubber EPdm/PP - copolymer EVa - ethylene-vinyl-acetate fPm - fluorinated rubber Glass fabric iiR - isobutylene-isoprene-rubber NBR - butadiene-acrylonitrile rubber NR - natural rubber Polyolefine PuR - polyurethane PVC - polyvinyl chloride SBR - styrene-butadiene rubber Silicone
Thomafluid ® II - Tubings and Pipes analytical Tubing Pressure Tubings Pharmaceutical Tubing Corrugated Tubings Elastomers: Silicone and TPEE Plastics: ETfE, fEP, mfa, Pa, PE, PEEK, Pfa Pi, PP, PTfE und PVdf Metals: Stainless steel and Titanium Connectors luer-/lock Capillary (hPlC) Tubing olive Connectors
Thomafluid ® III - Connectors made of plastics Tubing olive Connectors Screw Joints for Pipes and Tubings Quick-Release Coupling Systems Threaded adapter Conductive Connectors Tri-Clamp Connections
Thomafluid ® iV - Connectors and Cocks made of plastics and metals One-Piece Connectors: • luer-/lock Connectors • Tubing olive Connectors • Screw Joints • Quick-Release Coupling • Capillary Connectors • Bonding and Welding Connectors • Threaded adapters Two-Part Connectors: • Quick-disconnect Couplings Cocks : • drain Cocks, Stop Cocks • Pneumatic Cocks
THomafluId ® - Pumps drum Pumps Gas Pumps Hand- and foot Pumps Centrifugal Pumps Piston Pumps diaphragm Pumps Peristaltic Pumps Water-Jet Pumps Gear Pumps
Thomafluid ® V - Cocks and Valves • multiple-way Cocks • Ball Cocks • Solenoid Valves • Regulating Valves • Check Valves flowmeters • flow indicators / Switches • Electrical flowmeters • Variable area flowmeters Pumps • drum Pumps • hand- and foot Pumps • Piston Pumps • Peristaltic Pumps • diaphragm Pumps
ThomaPLaST ® I - Laboratory Plastics Containers Laboratory Instruments Laboratory Stoppers and Caps metering Facilities Stirring and mixing Semi-finished Products Filtration Dialysis membranes Filter housings Filter Disks and Filter Candles Sintered Elements Filter Cloths
ThomaPLaST ® II - Semi-Finished Products Tapes, Foils and Plates Wires, Rods and Pipes Cords and Profiles materials: Elastomers, Plastics, Glass Fibre, Ceramic, metals, Foam Rubbers, Synthetic, Natural materials
ThomaPLaST ® III Semi-Finished Products Profiles adhesives and Lubricants Greases, adhesives, Pastes, Cleaners, Etching agents and Sprays Fastening Elements Nuts, Finishing Washers, Screws, Grub Slotted Screws and Spacer Elements
ThomaPLaST ® IV Fastening Elements Spacer Elements Bushings Insulating Spacers / Insulators Closure Elements Caps and Plugs o-Rings Solid and Encapsulated
ThomaPoR ® - Filtration Dialysis Tubings membranes Ion-Exchange membranes Filter Cloths Sinter materials Filter Elements Filter modules Granular Sorbent material Chromatography
THOMAFLUID ® - Käsikirja I Analyysiletkut Kemikaaliletkut Teollisuusletkut Letkut lääkinnälliseen käyttöön Lääkeaineletkut elastomeeristä Raaka-aineet: Fluorikautsu (FPM) Polyolefiini Silikonikautsu(SI) Lasikangas PVC (polyvinyylikloridi) EVA (etyleeni-vinyyli-asetaatti) EPDM/PP-kopolymeeri EPDM (etyleeni-propyleeni-dieeni-kautsu) PUR (polyuretaani) TPEE (termoplastinen elastomeeri) LDPE/PVC-yhdistelmä IIR (isobutyleeni-isopreeni-kautsu) NR (luonnonkautsu) NBR (butadieeni-akryylinitriili-kautsu)
THOMAFLUID ® - Käsikirja II Analyysiletkut Kemikaaliletkut Teollisuusletkut Letkut lääkinnälliseen käyttöön Lääkeaineletkut Elastomeereista ja muoveista Luer-pikaliittimet Kapillaariliittimet Letkuliittimet Letkuruuviliittimet Pistoliittimet
THomAFluId ® I - Tuyaux flexibles en élastomères Tuyaux flexibles chimiques Tuyaux flexibles industriels Tuyaux flexibles de pompe matériaux: CR - caoutchouc chloroprène EPdm - éthylène-propylène-diène monomère EPdm/PP - copolymère EVA - éthylène-acétate de vinyle FPm - caoutchouc élastomère fluoré Tissu en fibre de verre IIR - caoutchouc isobutylène-isoprène NBR - caoutchouc acrylnitrile-butadiène NR - caoutchouc naturel PuR - polyuréthane PVC - polychlorure de vinyle
THomAFluId ® II Tuyaux, Raccords Tuyaux en élastomères et Tuyaux en plastiques Tuyaux flexibles d‘analyse Tuyaux flexibles chimiques Tuyaux flexibles industriels Tuyaux flexibles médicaux Tuyaux flexibles pharmaceutiques Raccords Raccords luer/lock Raccords de tubes capillaire (HPlC)
THomAFluId ® III Raccords monobloc – plastique Raccords olives : de tuyau flexible mini de tuyau Assemblages vissés : pour tuyaux flexibles pour tuyaux textiles pour tubes Fixations rapides pour tubes Adaptateurs filetés
THomAFluId ® IV Raccords plastique et métaux Raccords de tuyau et de tube Adaptateurs filetés Assemblages vissés Fixations rapides Systèmes d‘accouplement rapide
ThomAfluid ® - Programme global Tuyaux en élastomères et Tuyaux en plastiques Raccords luer/lock Raccords de tubes capillaire (hPlC) Raccords olives Assemblages vissés fixations rapides pour tubes Adaptateurs filetés Systèmes d‘accouplement rapide
THOMAFLUID ® - Manuale I Tubi per analitica Tubi per chimica Tubi per industria Tubi per medicina Tubi per farmaceutica In elastomeri Materiali: Gomma fluorurata (FPM) Poliolefine Gomma siliconica (SI) Tessuto di vetro PVC (Polivinilcloruro) EVA (Etil-vinil-acetato) EPDM/PP Copolimero EPDM (gomma etilene-propilene-diene) PUR (Poliuretano) TPEE (Elastomero termoplastico) LDPE/PVC-Composito IIR (Gomma isobutilene-isoprene) NR (Gomma naturale) NBR (Gomma butadiene-acrilnitrile)
THOMAFLUID ® - Manuale II Tubi per analitica Tubi per chimica Tubi per industria Tubi per medicina Tubi per farmaceutica In elastomeri e plastica Connettori Luer-Lock Collegamenti capillari Collegamenti a oliva Collegamenti filettati Collegamenti a baionetta
THOMAFLUID ® - Manuale III Connettori capillari Connettori Micro, Connettori Macro, Connettori per tubi Accoppiamenti rapidi Micro, Accoppiamenti rapidi Macro, Accoppiamenti rapidi multilume
THOMAFLUID ® - Manuale IV Connettori per tubazioni Accoppiamenti rapidi Tecnologia dei fluidi Flussimetri, contatori , controlli di flusso, smorzatori di pulsazioni, trasmettitori di pressione a membrana Rubinetti e valvole Rubinetti di intercettazione, di flusso, a sfera, a più vie; valvole di intercettazione, di dosaggio, di mantenimento della pressione, di riduzione della pressione, di dosaggio fine, a sfera, magnetiche, a membrana, motorizzate, di non ritorno, schiacciatubi per tubi flessibili
THOMAFLUID ® - Manuale V Tecnologia dei fluidi Flussimetri per liquidi, flussimetri per gas Raccordi e valvole in ottone ed acciaio inossidabile Rubinetti e valvole, filtri in fritta di vetro per HPLC, fil- tri a maglia, filtri per tubazioni, raccordi per reazione post-colonna, rubinetti Luer, connettori Luer, capillari metallici, connettori capillari, accoppiamenti rapidi connettori per tubo flessibile, raccordi per tubi Tecnologia di alimentazione dei fluidi Pompe centrifughe, pompe a membrana, pompe per microdosaggio, pompe ad ingranaggi, pompe peristaltiche, pompe per vuoto, pompe per alta pressione, pompe per gas
THOMAFLUID ® - Podręcznik I węże dla analiz chemii przemysłu medycyny farmacji z elastomerów Materiały: fluor-kauczuk (FPM) poliolefiny silikon-kauczuk (SI) włókno szklane PVC EVA EPDM/PP EPDM PUR TPEE LDPE/PVC IIR NR NBR
THOMAFLUID ® - Podręcznik II węże dla analiz chemii przemysłu medycyny farmacji z elastomerów oraz tworzyw sztucznych złączki Luer-Lock do kapilar oliwkowe gwintowe szybkozłączki
THOMAFLUID ® - Podręcznik III Łączniki kapilarne Łączniki mikro Łączniki makro Łączniki rurowe Szybkozłączki mikro Szybkozłączki makro Szybkozłączki wielokanałowe
THOMAFLUID ® - Podręcznik IV Łączniki do rur Szybkozłączki Technika przepływu liczniki przepływu, licznik przepływu z kółkiem owalnym, kontroler przepływu, tłumik pulsacji, membranowy oddzielacz ciśnienia Zawory zawory odcinające, przelotowe, kulowe, wielodrogowe. zawory odcinające, dozujące, stabilizujące ciśnienie, redukcyjne, regulacyjne precyzyjne, kulowe, elektromagnetyczne, membranowe, silnikowe, zwrotne, zaciskowe.
THOMAPLAST ® - Podręcznik I Przyrządy laboratoryjne z tworzyw sztucznych Strzykawki mikrolitrowe Biurety mikrolitrowe Septy Przykrywki do probówek Przyrządy mocujące Listwy zasilające z gniazdami Wyposażenie techniczne skalpele, noże laboratoryjne, skrobaki laboratoryjne narzędzia precyzyjne maszyny do suchego lodu pompy laboratoryjne
THOMAPLAST ® - Podręcznik II Półwyroby z elastomerów i tworzyw sztucznych Folie z tworzyw sztucznych, metali i związków węgla Technika cieplna i izolacji w elektronice węże, folie i osłony termiczne, kapturki termiczne, spray`e i pasty przewodzące ciepło Materiały: CEAc, CR, CR/EPDM, CR/SBR, CSM, ECTFE, EPDM, EPDM/PP, EPDM/PTFE, IIR, IIR/PTFE, FEP, FPM, IIR, IIR/PTFE, NBR, NR, NR/SBR, PA, PC, PCTFE, PE, PEEK, PES, PETP, PHB, PI, PMP, POM, PP, PUR, PTFE, PVC, PVDF, SBR, SI, TPE, węgiel, karbon, ceramika, aluminium, stal szlachetna, żelazo, miedź, cynk
THOMAPLAST ® - Podręcznik III tkaniny, płótna, włókniny, maty technika powlekania technika uszczelnień technika klejenia półprodukty metalowe śruby, nakrętki, podkładki z tworzyw sztucznych
THOMAPLAST® - Podręcznik IV Podkładki Pierścienie izolacyjne Rozetki Elementy dystansowe Bolce dystansowe Dystansowe wsporniki izolujące Opaski kablowe Zatyczki Elementy osłonowe Kapturki wysoko- temperaturowe Druty spawalnicze
THOMAPLAST ® - Podręcznik V Elementy uszczelniające Premium do dużych obciążeń Technika wysokich mocy w przemyśle spożywczym, farmacji i medycynie Zastosowania zgodne z CIP/SIP Thomaplast ® -pierścienie o profilu okrągłym z EPDM, FKM, VQM, HNBR, NBR, FFKM, FEP/FKM, FEP/VMQ, PTFE Thomaplast ® -uszczelki płaskie z NBR, EPDM, FKM, aramidu, PTFE, grafitu
THOMAPOR® - Podręcznik I Węże do dializ Filtracja membranowa Membrany z wymianą jonów Tkaniny na sita Filtracja spiekami porowatymi Aparaty do filtracji Świece filtracyjne Obudowy filtrów Technika oczyszczania gazów Chromatografia cieczo
RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid (RU)
THOMAFLUID ® - Manual I Mangueras para análisis Mangueras para la química Mangueras industriales Mangueras para técnica médica Mangueras farmacéuticas de elastómeros Materiales: Caucho fluorocarbonado (FPM) Poliolefinas Caucho de silicona (SI) Tejido de fibra de vidrio PVC (policloruro de vinilo) EVA (copolímero de etileno y acetato de vinilo) Copolímero de EPDM/PP EPDM (caucho de etileno propileno dieno) PUR (poliuretano) TPEE (elastómero termoplástico) Combinación de LDPE/PVC IIR (caucho de isobutileno-isopreno) NR (caucho natural) NBR (caucho de acrilonitrilo-butadieno)
THOMAFLUID ® - Manual II Mangueras para la analítica Mangueras para la química Mangueras industriales Mangueras para técnicas médicas Mangueras farmacéuticas de elastómeros y plásticos Conectores Luer-Lock Conectores para capilares Conectores de oliva para mangueras Racores para mangueras Conectores de enchufe
THOMADRIVE ® Antriebstechnik Rollenketten Kettenräder Zahnriemen Zahnräder und -stangen Spannsätze Buchsen Wellengelenke THOMAFLUID ® Manual III Microracores en sistema métrico y pulgadas Macroracores Racores para tubos (conductivo, giratorio) Racores - Tri-Clamp Conectores rápidos para tuberías Enchufes, Niples dobles
RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid I (CZ)
THOMAFLUID ® - Příručka II Hadice pro analýzy Hadice pro chemikálie Průmyslové hadice Hadice pro lékařské přístroje Hadice pro farmaceutiku z elastomerů a umělých hmot Spojky Luer-Lock Kapilární spojky Nástrčné hadicové spojky Šroubení pro hadice Rychlospojky
THOMAFLUID ® - El Kitabı I Elastomer‘den Analiz hortumları Kimya hortumları Sanayi hortumları Tp tekniği hortumları İlaç hortumları Malzeme: Flor-Kauçuk (FPM) Polyolefin Silikon-Kauçuk (SI) Cam elyaf doku PVC (Polivinilklorür) EVA (Etilen-Vinil-Asetat)) EPDM (Etilen-Propilen-Dien-Kauçuk) EPDM/PP Copolimer PUR (Poliüretan) TPEE (Termoplastik Elastomer) LDPE/PVC- Kompozit (Vulkanize) IIR (İzobütilen-Isopren-Kauçuk) NR (Tabii kauçuk) NBR (Butadien-Akrinitril-Kauçuk)
THOMAFLUID ® - El Kitabı II Elastomer‘den Analiz hortumları Kimya hortumları Sanayi hortumları Tıp tekniği hortumları İlaç hortumları Malzeme: Flor-Kauçuk (FPM) Polyolefin Silikon-Kauçuk (SI) Cam elyaf doku PVC (Polivinilklorür) EVA (Etilen-Vinil-Asetat)) EPDM (Etilen-Propilen-Dien-Kauçuk) EPDM/PP Copolimer PUR (Poliüretan) TPEE (Termoplastik Elastomer) LDPE/PVC- Kompozit (Vulkanize) IIR (İzobütilen-Isopren-Kauçuk) NR (Tabii kauçuk) NBR (Butadien-Akrinitril-Kauçuk)
THOMAFLUID ® - Kézikönyv I Analitika tömlők Vegyi tömlők Ipari tömlők Gyógyászat technikai tömlők Gyógyszer tömlők Elasztomer anyagból Nyersanyagok: Fluor-kaucsuk (FPM) Poliolefin Szilikon-kaucsuk (SI) Üvegszövet PVC (polivinilklorid) EVA (etilén-vinil-acetát) EPDM/PP kopolimer EPDM (etilén-propilén-dién-kaucsuk) PUR (poliuretán) TPEE (hőre lágyuló elasztomer) LDPE/PVC-kötés IR (isobutilén-isoprén-kaucsuk) NR (naturkaucsuk) NBR (butadién-acrilnitril-kaucsuk)
THOMAFLUID ® - Kézikönyv II Analitika tömlők Vegyi tömlők Ipari tömlők Gyógyászat technikai tömlők Gyógyszertömlők Elasztomer anyagból és műanyagból Luer-Lock csatlakozók Kapilláris csőcsatlakozók Tömlőcsatlakozó darab Tömlő csavarzatok Dugaszolható csőösszekötők
In unserem Onlineshop können Sie Laborbedarf ohne Mindestbestellwert bestellen. Unsere Kunden aus Deutschland, der Schweiz und Österreich sowie vielen weiteren Ländern vertrauen seit über 30 Jahren auf RCT Reichelt Chemietechnik. Große Auswahl, hohe Qualität, günstige Preise, faire Versandkosten!
* Alle Preise verstehen sich zzgl. Mehrwertsteuer und Versandkosten und ggf. Nachnahmegebühren, wenn nicht anders beschrieben. Copyright © - Alle Rechte vorbehalten